GW Instek GDM-8261A User manual - Manual (Page 143)

REMOTE CONTROL
143
2. Press the Down key and the
Left key repeatedly until LAN
selection display appears.
Note: The LAN menu will be
selectable only when the LAN
card is installed.
HOLD
3. Press the Down key. The LAN
ON/OFF selection appears.
4. Press the Up/Down key to
select ON or OFF. ON will turn
the LAN option on, OFF will
turn the LAN option off.
Note: Ethernet configuration
settings can only be edited when
LAN is set to ON.
5. Press the Enter key followed by
the Exit key. The Ethernet port
is turned on/off and the display
goes back to the previous
display.
AUTO
ENTER
/ EXIT SHIFT
6. Connect the Ethernet cable to
the rear panel Ethernet port
after the Ethernet card has been
installed (page 141).