GW Instek GDM-8261A User manual - Manual (Page 73)

ADVANCED MEASUREMENT
73
3. Press the Enter key to confirm
editing and to start
measurement.
AUTO
ENTER
3. View Data S DC AUTO
MATH
1st display Shows the current count
number/measurement
2nd display Indicates the count measurement mode.
MATH Indicates Math operation
Press the 2nd key to cycle through
the different statistical data
measurements.
2ND
COUNT Indicates the current measurement
count
MIN Indicates the minimum data value
MAX Indicates the maximum data value
AVG Indicates the mean (average) value
STDEV Indicates the standard deviation of the
data
Stop/Restart
Measuring Press the SHIFT key for 2 seconds
to stop or restart measuring.
/ EXIT SHIFT
(hold for 2
seconds)

S: Indicates the measurement has started
P: Indicates the measurement has stopped
Exit Press the SHIFT key and the 2/4W
key to exit.
/ EXIT SHIFT
2/4W
MATH