GW Instek GDM-8261A User manual - Manual (Page 78)

GDM-8261A User Manual
78
Set Trigger Delay
Background Trigger delay defines the time delay between triggering
and measurement start. The default is set at 10ms.
Panel operation 1. Press the Shift key, the 2nd
(Menu) key, the Right key, the
Down key. The delay menu
appears.
/ EXIT SHIFT
2ND
MENU
TRIG
2. Press the Down key. The delay
setting appears.
3. Move the flashing point (cursor)
using the Left/Right key.
Change the value using the
Up/Down key.
HOLD TRIG
4. Press the Enter key to confirm
editing and press the Exit key.
The display goes back to
previous mode.
AUTO
ENTER
/ EXIT SHIFT
Range 0 ~ 9999ms, 1ms resolution