GW Instek GDM-8261A User manual - Manual (Page 93)

SYSTEM/DISPLAY CONFIGURATION
93
4. Use the Up/Down keys to
select either ACCUR or
QUICK.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT
Frequency / Period Settings
Input Port Selection
Background The INJACK settings set which input port is used for
frequency or period measurements.
Setting VOLT, 1A, 10A
Panel operation 1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key three times. The
Frequency/Period menu
appears.
/ EXIT SHIFT
2ND
MENU
TRIG TRIG TRIG
2. Press the Down key twice. The
INJACK setting appears.
1st display Indicates which input port is assigned
as the input port.
3. Select the input using the
Up/Down key.