GW Instek GDM-8261A User manual - Manual (Page 191)

REMOTE CONTROL
191
[SENSe:]CURRent:DC:RESolution?
Returns the DC Current resolution.
Parameter: [None] | [MIN | MAX]
[SENSe:]CURRent:AC:RESolution
Sets the AC Current measurement resolution. The resolution depends on
the rate and range settings.
Parameter: Resolution( | MIN | MAX)
Example: SENS:CURR:AC:RES 0.0001
Sets the AC Current resolution to 0.0001
[SENSe:]CURRent:AC:RESolution?
Returns the AC Current resolution.
Parameter: [None] | [MIN | MAX]
[SENSe:]RESistance:RESolution
Sets the 2W Resistance measurement resolution. The resolution depends
on the rate and range settings.
Parameter: Resolution( | MIN | MAX)
Example: SENS:RES:RES 0.01
Sets the 2W Resistance resolution to 0.01
[SENSe:]RESistance:RESolution?
Returns the 2W Resistance resolution.
Parameter: [None] | [MIN | MAX]
[SENSe:]FRESistance:RESolution
Sets the 4W Resistance measurement resolution. The resolution depends
on the rate and range settings.
Parameter: Resolution( | MIN | MAX)
Example: SENS:FRES:RES 0.01
Sets the 4W Resistance resolution to 0.01
[SENSe:]FRESistance:RESolution?
Returns the 4W Resistance resolution.
Parameter: [None] | [MIN | MAX]
[SENSe:]CONTinuity:RESolution
Sets the Continuity measurement resolution. The resolution depends on the
rate and range settings.
Parameter: Resolution( | MIN | MAX)
Example: SENS:CONT:RES 0.001
Sets the Continuity resolution to 0.001
[SENSe:]CONTinuity:RESolution?
Returns the Continuity measurement resolution.
Parameter: [None] | [MIN | MAX]