GW Instek GDM-8261A User manual - Manual (Page 81)

SYSTEM/DISPLAY CONFIGURATION
81
2. Select the filter type using the
Up/Down key.
 
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
HOLD TRIG
Set Filter Window
threshold 4. Press the Enter key to confirm
editing.
AUTO
ENTER
5. Select the Window threshold
using the Up/Down key. The
display changes accordingly.
Range None, 0.01%, 0.1%, 1%, 10%
6. Press the Enter key to confirm
editing. The Filter indicator
appears on the display.
AUTO
ENTER
V m
S DC
FILT
FILT Indicates manual Filter setting
Turn off Filter Press the Shift key followed by the
MX/MN (Filter) key. The Filter
indicator will disappear from the
display.
/ EXIT SHIFT
MX/MN
FILTER