GW Instek GDM-8261A User manual - Manual (Page 26)

GDM-8261A User Manual
26
Refresh Rate Function S M F
(Readings/s) Continuity / Diode 100 200 300
DCV/DCI/100Ω~
100MΩ (Accurate) 5 60 240
DCV/DCI/100Ω~
100MΩ (Quick) 30 600 2400
ACV/ACI 1.2
(sec/reading)
3.38 30
Frequency / Period 1 10 100
Selection steps 1. Press the Shift key followed by
the AUTO (RATE) key. The
refresh rate switches to the next.
/ EXIT SHIFT
AUTO
RATE
2. The refresh rate indicator shows
the current status.
S
→
M
→
F
→
S
Reading Indicator
Background
The reading indicator next to the 1st display flashes
according to the refresh rate setting.
V
When no data is
captured When there is no captured data, the reading indicator
flashes once every two seconds (slower than the normal
refresh rate), indicating the DMM is in standby mode.