GW Instek GDM-8261A User manual - Manual (Page 13)

GETTING STARTED
13
Sense HI
Terminal W
4W
SENSE
HI
Accepts HI sense line in 4W resistance
measurement. For details, see page 34.
Input LO
Terminal
COM
Accepts ground (COM) line in all
measurements except the sense line in
4W Resistance (page 34).
The maximum withstand voltage
between this terminal and earth is
500Vpk.
Input HI Terminal INPUT
V
W
Used as an input port for all
measurements except for DC/AC
Current measurements.
DC/AC 10A
Terminal 10A Accepts DC/AC Current input.
For DCI or ACI details, see page 32.
Measurement Keys (upper row)
SHIFT/EXIT / EXIT SHIFT The Shift key is used to select the
secondary functions assigned to
each front panel key. When pressed,
the
SHIFT indicator appears in the
display.
As the Exit key, it gets out of the
parameter configuration mode and
goes back to the measurement result
display mode.
ACV
ACV
Measures AC Voltage (page 27).
SHIFT → ACV
(SCAN) / EXIT SHIFT
ACV
SCAN
Starts the optional scan
measurement (page 113).
DCV
DCV
Measures DC Voltage (page 27).