GW Instek GDM-8261A User manual - Manual (Page 152)

GDM-8261A User Manual
152
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto D2.
AUTO
ENTER
7. Repeat steps 4 to 6 for D2, D3 and D4.
8. Press the Exit key to exit from
the configuration menu.
/ EXIT SHIFT
5. Reset LAN
card 1. To make any changes take effect, set RESET to YES.
See page 144 for details.
View MAC Address
View MAC
Address 1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
/ EXIT SHIFT
2ND
MENU
HOLD
2. Press the Down key and the
Right key repeatedly until the
MAC menu level appears.
TRIG