GW Instek GDM-8261A User manual - Manual (Page 121)

SCANNER (OPTIONAL)
121
Recall Scan/Step Result
Panel operation 1. After the Scan/Step is
completed, the data is stored
internally. Press the Shift key
followed by the ACI (Recall) key.
/ EXIT SHIFT
ACI
RECALL
2. The first channel appears. (example: channel 101)
V m
DC
RCL
3. To view the Standard
Deviation/Min/ Max/Average
data, press the Left and Right
keys.
HOLD TRIG
  
4. To move to the next channel,
press the Up/Down key.
5. Press the Exit key to get out
from recall mode.
/ EXIT SHIFT
Setup and Run Monitoring
Panel operation 1. Press the Shift key, the 2nd
(Menu) key, the Left key. The
Scan menu appears.
/ EXIT SHIFT
2ND
MENU
HOLD
2. Press the Down key followed by
the Left key twice. The Monitor
Scan setting menu appears.
HOLD HOLD