GW Instek GDM-8261A User manual - Manual (Page 137)

REMOTE CONTROL
137
Format Description Example
V Value +0.503E-4
V+U Value, Unit +0.503E-4, V DC
V+C Value, Count# +0.503E-4, +00001#
V+U+C Value, Unit, Count# +0.503E-4, V DC,
+00001#
Configuration 1. Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the TX TERM
configuration menu appears.
/ EXIT SHIFT
2ND
MENU
HOLD
2. Press the Down key, the Left
key. The FORMAT menu
appears.
HOLD
3. Press the Down key. The
FORMAT selection menu
appears.
4. Press the Up/Down key to
select the Return format.
  
5. Press the Enter key followed by
the Exit key. The return format
setting is saved and the display
goes back to the default display.
AUTO
ENTER
/ EXIT SHIFT