GW Instek GDM-8261A User manual - Manual (Page 83)

SYSTEM/DISPLAY CONFIGURATION
83
6. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT
Display Setting
Display Light Setting
Background The display light setting adjusts the brightness of the
display reading. Use light 3 or more (brighter) when
working indoor; use light 2 or 1 (darker) when working
outdoor under the sun.
Level 5 (brightest) ~ 1 (darkest), default = 3
Panel operation 1. Press the Shift key followed by
the 2nd (Menu) key. The system
menu appears.
/ EXIT SHIFT
2ND
MENU
2. Press the Down key, then the
Right key twice. The light menu
appears.
TRIG TRIG
3. Press the Down key. The light
level setting appears.
1st display Shows the current display light level