GW Instek GDM-8261A User manual - Manual (Page 71)

ADVANCED MEASUREMENT
71
1. Use the Left/Right key to move
the cursor (flashing point)
between the digits and decimal
point.
HOLD TRIG
2. Change the parameter using the
Up/Down key.
3. Press the Enter key to confirm
editing.
AUTO
ENTER
3. View
Percentage S DC
V
AUTO
MATH
1st display Shows the calculated result
2nd display Indicates the Percentage measurement
MATH Indicates Math operation
Statistics Calculations
Background The Analyze Stats menu allows you to make statistical
calculations on a continuous or user-defined number of
measurement counts. The measurements supported
include, Maximum, Minimum, Average and Standard
deviation.
Number of
counts User Defined 2~100,000 counts
Continuous 9,999,999 count
1. Activate
Statistics Press the Shift key, the 2/4W (Math)
key, the Up key. The Analyze Stats
setting menu appears.
/ EXIT SHIFT
2/4W
MATH