GW Instek PSU-Series User Manual - Manual (Page 96)

PSU Series User Manual
96
Lock Mode F-19
0:Lock Panel, Allow Output OFF
1:Lock Panel, Allow Output ON/OFF
USB/GPIB Settings
Show front panel USB
status
F-20 0 = None, 1 = Mass Storage
Show rear panel USB
status
F-21 0 = None, 1 = Linking to PC
Setup rear USB Speed F-22
0 = Disable USB, 1 = Full Speed, 2 =
Auto Detect Speed
GPIB Address F-23 0 ~ 30
GPIB Enable/Disable F-24 0 = Disable GPIB, 1 = Enable GPIB
Show GPIB available
status
F-25 0 = No GPIB, 1 = GPIB is available
SCPI Emulation F-26
0 = GW Instek, 1 = TDK GEN, 2 =
Agilent 5700, 3 = Kikusui PWX
LAN Settings
Show MAC Address-1
F-30 0x00~0xFF
Show MAC Address-2 F-31 0x00~0xFF
Show MAC Address-3 F-32 0x00~0xFF
Show MAC Address-4 F-33 0x00~0xFF
Show MAC Address-5 F-34 0x00~0xFF
Show MAC Address-6 F-35 0x00~0xFF
LAN Enable F-36 0 = OFF, 1 = ON
DHCP F-37 0 = OFF, 1 = ON
IP Address-1 F-39 000~255
IP Address-2 F-40 000~255
IP Address-3 F-41 000~255
IP Address-4 F-42 000~255
Subnet Mask-1 F-43 000~255
Subnet Mask-2 F-44 000~255
Subnet Mask-3 F-45 000~255
Subnet Mask-4 F-46 0~255
Gateway-1 F-47 0~255
Gateway-2 F-48 0~255
Gateway-3 F-49 0~255
Gateway-4 F-50 0~255
DNS address -1 F-51 0~255
DNS address -2 F-52 0~255
DNS address-3 F-53 0~255
DNS address-4 F-54 0~255