GW Instek PSU-Series User Manual - Manual (Page 15)

GETTING STARTED
15
6. Lock/Local
Button
Lock/Local
Unlock
Used to lock all front panel
buttons other than the Output
Button or it switches to local
mode.
Unlock
Button (Long push) Used to unlock the
front panel buttons.
7. PROT Button
PROT
ALM_CLR
Used to set and display OVP, OCP
and UVL.
ALM_CLR
Button (Long push) Used to release
protection functions that have
been activated.
8. Function
Button
Function
M1
Used to configure the various
functions.
M1 Button (+Shift) Used to recall the M1
setup.
(+Shift and hold) Used to save the
current setup to M1.
9. Test Button
TEST
M2
Used to run customized scripts for
testing.
M2 Button (+Shift) Used to recall the M2
setup.
(+Shift and hold) Used to save the
current setup to M2.
10. Set Button
SET
M3
Used to set and confirm the output
voltage and output current.
M3 Button (+Shift) Used to recall the M3
setup.
(+Shift and hold) Used to save the
current setup to M3.