beautypg.com

Psu series user manual, Use the voltage knob to set the voltage, Cv will become illuminated (center) – GW Instek PSU-Series User Manual User Manual

Page 56

background image

PSU Series User Manual

56

9. Use the Voltage knob to set the

voltage.

Voltage

Note

Notice the Set key becomes illuminated when
setting the current or voltage. If the Voltage or
Current knobs are unresponsive, press the Set key
first.

10. Press the Output key. The

Output ON LED becomes
lit.

Output

CV will become

illuminated (center)

A

V

VOLTAGE

CURRENT

VSR

LAN

RMT

ERR

DLY

ALM

ISR

M 1

M 2

M 3

RUN

C V

C C

Note

Only the voltage level can be altered when the
output is on. The current level can only be changed
by pressing the Set key.

For more information on the Normal Function
Settings (F-00 ~ F-61, F-88~F-89) see page 99.