GW Instek PSU-Series User Manual - Manual (Page 60)

PSU Series User Manual
60
Panel Lock
The panel lock feature prevents settings from being changed
accidentally. When activated, the Lock/Local key will become
illuminated and all keys and knobs except the Lock/Local key and
Output key (if active) will be disabled.
If the instrument is remotely controlled via the USB/LAN interface,
the panel lock is automatically enabled.
Activate the panel
lock Press the Lock/Local key to active
the panel lock. The key will
become illuminated. Lock/Local
Disable the panel
lock Hold the Lock/Local key for ~3
seconds to disable the panel lock.
The key’s light will turn off. Lock/Local
Unlock
Save Setup
The PSU has 3 dedicated keys (M1, M2, M3) to save the set current,
set voltage, OVP, OCP and ULV settings.
Save Setup 1. Press the SHIFT key. The shift key
will light blue.
2. Hold the desired memory key for
>3 seconds (M1, M2, M3).
Shift
Function
M1
(hold)