GW Instek PSU-Series User Manual - Manual (Page 183)

APPENDIX
183
A
PPENDIX
PSU Factory Default Settings
The following default settings are the factory configuration settings
for the power supply.
For details on how to return to the factory default settings, see page
47.
Initial Settings Default Setting
Output Off
LOCK 0 (Disabled)
Voltage 0V
Current 0A
OVP 1.1 X Vrate
OCP 1.1 X Irate
Normal Function
Settings
Setting Default Setting
Output ON delay time F-01 0.00s
Output OFF delay time F-02 0.00s
V-I mode slew rate select F-03 0 = CV high speed priority (CVHS)
Internal resistance
setting F-08 0.000Ω
Bleeder circuit control F-09 1 = ON
Buzzer ON/OFF control F-10 1 = ON
OCP Delay Time F-12 0.1 sec
Current Setting Limit F-13 0 = OFF
Voltage Setting Limit F-14 0 = OFF
Display Memory
parameter when recalling F-15
0 = OFF