GW Instek PSU-Series User Manual User Manual

Page 171

COMMUNICATION INTERFACE

171

Run this query command via the terminal
application after the instruments have been
configured for multi-unit control. See page 168.

ADR 8
IDN?

The identity string for the Master unit will be
returned:

GW-INSTEK,PSU40-38,,T0.01.12345678

Type the following:

ADR 11
IDN?

The identity string for the slave with address 11
will be returned:

GW-INSTEK,PSU40-38,,T0.01.12345678

Note: TDK commands do not use LF (line feed)
codes to terminate commands. See the TDK
Genesys user manual for further information.

Note

For further details, please see the programming
manual, available on the GW Instek web site @