GW Instek PSU-Series User Manual - Manual (Page 162)

PSU Series User Manual
162
4. Select the device (GPIB address of PSU) that
now appears in the System>Devices and
Interfaces > GPIB-USB-HS “GPIBX” node.
5. Click on the VISA Properties tab on the bottom.
6. Click Open Visa Test Panel.
4
5
6
7. Click on Configuration.
8. Click on the GPIB Settings tab and confirm that
the GPIB settings are correct.
7
8
9. Click on the I/O Settings tab.
10. Make sure the Enable Termination Character