GW Instek PSU-Series User Manual - Manual (Page 166)

PSU Series User Manual
166
F-76 = 00~31
UART address if TDK is selected
for F-75.
3. The RMT indicator will turn on when a remote
connection has been established.
RMT indicator
A V
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
Note
If TDK (emulation mode) is selected for F-75, the
TDK GENESYS legacy commands should be used
for remote commands. See the TDK Genesys user
manual for details.