GW Instek PSU-Series User Manual - Manual (Page 188)

PSU Series User Manual
188
Constant Current Mode
Model PSU 6-200 12.5-120 20-76 40-38 60-25
Line regulation
(*3) mA 22 14 9.6 5.8 4.5
Load regulation
(*11) mA 45 29 20.2 12.6 10
Ripple and
noise (*12) r.m.s. mA 400 240 152 95 75
Temperature
coefficient ppm/ °C 100ppm/°C of rated output current, after a 30 minute
warm-up.
Protection Function
Model PSU 6-200 12.5-120 20-76 40-38 60-25
Over voltage
protection
(OVP) Setting
range V 0.6 - 6.6 1.25 -
13.75
2 - 22 4 - 44 5 - 66
Setting
accuracy V 0.06 0.125 0.2 0.4 0.6
Over current
protection
(OCP) Setting
range A 5 - 220 5 - 132 5 - 83.6 3.8 - 41.8 2.5 - 27.5
Setting
accuracy A 4 2.4 1.52 0.76 0.5
Under voltage
limit (UVL) Setting
range 0 - 6.3 0 - 13.12 0 - 21 0 - 42 0 - 63
Over
temperature
protection
(OHP) Operation Turn the output off.
Incorrect
sensing
connection
protection
(SENSE) Operation Turn the output off.
Low AC input
protection (AC-
FAIL) Operation Turn the output off.
Shutdown (SD) Operation Turn the output off.
Power limit
(POWER
LIMIT) Operation Over power limit.
Value
(fixed) Approx. 105% of rated output power