GW Instek PSU-Series User Manual - Manual (Page 154)

PSU Series User Manual
154
VMON
Connection
PSU
DMM
Isolated
Voltage
or
Current
Option 5
6
Output
Terminal
V MON
0 →10V
or
0 →5V
or
4 mA→ 20mA
 Pin6 (+VMON_ISO) → Pos (+)
 Pin5 (GND_ISO) → Neg (-)
IMON
Connection
PSU
DMM
Isolated
Voltage
or
Current
Option 5
7
Output
Terminal
I MON
0 →10V
or
0 →5V
or
4 mA→ 20mA
 Pin7(+IMON_ISO) → Pos (+)
 Pin5(GND_ISO) → Neg (-)
Steps 1. Connect the external voltage or external current
source to the isolated voltage or current option
according to the connection diagrams above.
2. If using the isolated voltage option,
set the F-96 settings to 0 (0~5V) or
1 (0~10V) to choose the VMON or
IMON output range.
Page 111
3. If using the isolated current option,
set the F-96 power on
configuration setting to 1 to set the
VMON and IMON output to 4mA
~ 20mA.
Page 111
 Be sure to cycle the power after the power
on configuration has been set.