GW Instek PSU-Series User Manual - Manual (Page 53)

OPERATION
53
2. The OVP protection function will be displayed
on the voltage display and the setting will be
displayed on the current display.
Protection
function
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
V
Protection
setting
A
Choose a
Protection
Function 3. Use the Voltage knob to select a
protection function.
Voltage
Range OVP, OCP, UVL
Setting the
Protection Level 4. Use the Current knob to set the
protection level for the selected
function.
Current
Setting Range
PSU Model OCP OVP UVL
6-200 5~220 0.6~6.6 0~6.3
12.5-120 5~132 1.25~13.75 0~13.12
20-76 5~83.6 2~22 0~21
40-38 3.8~41.8 4~44 0~42
60-25 2.5~27.5 5~66 0~63
5. Press PROT again to exit. The
PROT key light will turn off.
PROT
Clear
OVP/OCP/UVL
protection The OVP, OCP or UVL protection
can be cleared after it has been
tripped by holding the ALM_CLR
button for 3 seconds. PROT
ALM_CLR