GW Instek PSU-Series User Manual - Manual (Page 66)

PSU Series User Manual
66
Output
S+
S-
PSU #2
Output
Output
S+
S-
PSU #1
Output
Load
Input
Input
Page 62
2. Operate the instrument as normal.
See the Parallel Operation chapter
for details.
Page 69
Serial PSU Units 1. a. Connect the 1 st S+ terminal to the positive
potential of the load.
b. Connect the 1 st S- terminal to the positive
output terminal of the second PSU unit.
c. Connect the 2 nd S+ terminal to the positive
terminal of the second PSU unit.
d. Connect the 2 nd S- terminal to negative
terminal of the load.