GW Instek PSU-Series User Manual - Manual (Page 191)

APPENDIX
191
Input Characteristics
Model PSU 6-200 12.5-120 20-76 40-38 60-25
Norminal input
rating 100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage
range 85Vac ~ 265Vac
Input frequency
range 47Hz ~ 63Hz
Maximum input
current 100Vac A 21
200Vac A 11
Inrush current Less than 50A.
Maximum input
power VA 2000
Power factor 100Vac 0.99
200Vac 0.98
Efficiency (*13) 100Vac % 77 82 83 84 84
200Vac % 79 85 86 87 87
Hold-up time 20ms or greater
Interface Capabilities
Model PSU 6-200 12.5-120 20-76 40-38 60-25
USB
TypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB
Class: CDC(Communications Device Class)
LAN
MAC Address, DNS IP Address, User Password,
Gateway IP Address, Instrument IP Address, Subnet
Mask
GPIB SCPI - 1993, IEEE 488.2 compliant interface
RS-232/RS-485 Complies with EIA232D / EIA485 Specifications
Environment Conditions
Model PSU 6-200 12.5-120 20-76 40-38 60-25
Operaing
temperature
0˚C to 50˚C
Storage
temperature
-25˚C to 70˚C
Operating
humidity
20% to 85% RH; No condensation
Storage
humidity
90% RH or less; No condensation
Altitude Maximum 2000m