GW Instek PSU-Series User Manual - Manual (Page 88)

PSU Series User Manual
88
4. Rotate the Current knob to choose
a memory number. (Excluding T-
05)
Current
Range 1~10
5. Press the Voltage knob to complete
the setting.
Voltage
Exit Press the Test key again to exit the
Test settings. The Test key light
will turn off. TEST
Load Test Script from USB
Overview Before a test script can be run, it must first be
loaded into a one of the 10 memory save slots.
Before loading a test script into memory:
 Ensure the script file is placed in the root
directory.
 Ensure the file name number corresponds to
the memory number that you wish to save
to. For example t001.tst can only be loaded
into memory number #01, t002.tst into
memory number #02, and so on.
 Use the T-05 setting to see how much
memory is available in internal memory.
Steps 1. Insert a USB flash drive into the
front panel USB-A slot. Ensure the
flash drive contains a test script in
the root directory.