GW Instek PSU-Series User Manual - Manual (Page 175)

COMMUNICATION INTERFACE
175
Sockets Server Configuration
Configuration This configuration example will configure the
PSU socket server.
The following configuration settings will
manually assign the PSU an IP address and
enable the socket server. The socket server port
number is fixed at 2268.
1. Connect an Ethernet cable from the
network to the rear panel Ethernet
port.
LAN
2. Press the Function key to enter the
Normal configuration settings.
Page 109
Set the following LAN settings:
F-36 = 1 Enable LAN
F-37 = 0 Disable DHCP
F-39 = 172 IP Address part 1 of 4
F-40 = 16 IP Address part 2 of 4
F-41 = 5 IP Address part 3 of 4
F-42 = 133 IP Address part 4 of 4
F-43 = 255 Subnet Mask part 1 of 4
F-44 = 255 Subnet Mask part 2 of 4
F-45 = 128 Subnet Mask part 3 of 4
F-46 = 0 Subnet Mask part 4 of 4
F-43 = 172 Gateway part 1 of 4
F-44 = 16 Gateway part 2 of 4
F-45 = 21 Gateway part 3 of 4
F-46 = 101 Gateway part 4 of 4
F-57 = 1 Enable Sockets