GW Instek PSU-Series User Manual - Manual (Page 20)

PSU Series User Manual
20
5. Remote-IN LAN RS 485 / 232 Two different types of cables can
be used for RS232 or RS485-based
remote control.
PSU-232: RS232 cable with DB9
connector kit.
PSU-485: RS485 with DB9
connector kit.
6. Remote-OUT LAN RS 485 / 232 RJ-45 connector that is used to
daisy chain power supplies with
the Remote-IN port to form a
communication bus.
PSU-485S: Serial link cable with
RJ-45 shielded connector.
7. Analog
Control
ANALOG PROGRAMMING
External analog control connector.
8. Remote
Sense
S LS S LS NC
REMOTE SENSE
Compensation of load wire drop.
9. Option Slot
8 7 6 5 4 3 2 1
0 - 5V / 0 - 10V
ISOLATED PROGRAMMING
Blank sub-plate for standard units.
Isolated Analog connector for
units equipped with Isolated
Current and Voltage
Programming and Monitoring
option.
GPIB connector for units equipped
with IEEE programming option.