Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 95)

Job Menu
R-87
Note: If a boundary is defined, only polylines that fall within the
boundary can be added.
New… : opens the New Polyline screen, which is identical to the Edit
Polyline screen and is used to create a new polyline.
Edit Polyline
Job View DTM Breaklines… Edit… or
Job View DTM Breaklines… New… .
The Edit Polyline screen is used to perform some preliminary editing
to a polyline prior to accessing the polyline editor with the Edit… key.
Tap Points… : allows you to tap points to define a new
polyline. If a polyline was already selected prior to
accessing this screen, it will be replaced by the polyline
being created.
To / From… : allows you to define a range of points that
define a polyline. If a polyline was already selected prior
to accessing this screen, it will be replaced by the
polyline being created.
Edit… : accesses the Polyline Editor, described on Page
R-66, where the polyline can be further edited.
Clear : will permanently remove the selected polyline
from the job.
Properties… : opens the New Line dialog box where the
description, layer and feature attributes can be modified.
: opens the Map Display Options screen (Page R-450) to select
what is displayed on the screen.