Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 317)

Stakeout Menu
R-309
Stake Line and Offset
Stakeout Line and Offset .
The Stake Line and Offset screen is used to stake stations on a line,
or at an offset to it, at fixed intervals.
Start Point: defines the first point of the line to be
staked.
End Point / Direction : defines the second point of the
line, or the direction of the line to be staked, respectively.
Begin Station: defines the station associated with the
Start Point.
Backsight… : accesses the Backsight Setup screen (Page
R-124).
Next> : opens Screen Two.
: accesses the Stakeout Settings screen (Page R-49).
Stake Line and Offset – Screen Two
Station to Stake: is the desired station that you want to
stake.
Station Interval: is the value that is added to the Station
to Stake after the Next Sta button is pressed.
Next Sta : advances the Station to Stake by the Station
Interval.
Offset: defines the offset distance and if the offset occurs
to the right of the line, when R is selected, or left, when
L is selected. The right or left side is referenced while
viewing the line from the Start Point.