Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 432)

Survey Pro Reference Manual
R-424
2. The Angle Right value is changed to zero to reflect the change. The
instrument now needs to be turned horizontally to zero to face the
design point.
3. To prevent errors, the backsight set up is invalidated when
exiting the Stakeout dialog if this button has been used. A Circle
zeroed on a design point is meaningless once the design point has
been staked.
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : accesses the final Stake Road screen where the shots to the
stake point are performed.
Stake Road – Screen Four
Height of Rod: is the length of the rod.
Design Elev: displays the current design elevation,
which can be modified with the Change… button.
FORWARD / BACK: indicates if the rod must move
forward (toward the total station) or backward (away
from the total station).
Go RIGHT / Go LEFT: indicates if the rod must move to
the right or left from the total station’s point of view.
EDM: This button can be toggled to shoot in various
EDM modes. The options available depend on the total
station being used. Consult the total station’s
documentation for more information on the EDM modes
that it supports.
CUT / FILL: displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.
Rod Elev: displays the elevation at the rod’s location computed from
the last shot.