Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 375)

COGO Menu
R-367
Solve : computes the offset points, and stores them if the Store Pts
checkbox is checked.
Station Offset
Cogo Station Offset .
The Station Offset screen will compute and optionally store a point at
a specified station and offset to an existing polyline or alignment.
The elevation for the stored point will always be set to the elevation
of the first node of the polyline, or alignment.
Start Station: is the station for the first node of the
selected line.
Station: is the station on the line where you want to
compute an offset point from.
Offset: is the offset distance that is to the left (when L
is selected) or right (when R is selected) from the
selected line.
; Store Pts : When checked, will store the computed
offset point with the name specified in the corresponding
field.
Tap Line… : opens a window where any polyline or
alignment in the current job can be selected.
To/From… : opens a window where a new line can be
defined by entering a range of points.
Solve : computes the location of the offset point and optionally stores
the point.