Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 94)

Survey Pro Reference Manual
R-86
Choose Polyline
Job View DTM Boundary… .
The Choose Polyline screen is used to select an existing
polyline that defines a boundary for your non-reference
DTM surface.
All the polylines in the current job are displayed. Select
the appropriate polyline and tap .
Add/Edit Break-lines
Job View DTM Breaklines… .
The Add/Edit Break-lines screen is used to select, edit,
create, or delete the break lines that will be used when
computing the DTM. The break lines that will be used
when computing the DTM are listed in this screen.
Edit… : opens the Edit Polyline screen where the
selected polyline can be modified or a new polyline can
be created.
Delete… : will move the selected polyline to the
Auxiliary layer.
Add Existing… : will display all the polylines in the
current job. Selecting a polyline and tapping will
move the selected polyline to the DTM layer.