Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 294)

Survey Pro Reference Manual
R-286
Note: The screens available after tapping Solve > or Next Point > are
identical to Screens Two and Three in the Stake Points routine and
are described on pages R-280 through R-282.
: accesses the Stakeout Settings screen (Page R-49).
Edit Point List
Stakeout Stake List of Points Change Design Point… or
Stakeout Stake List of Points
Edit List…
The Edit Point List screen is used to modify the existing point list.
Remove : removes the selected point from the point list.
Clear All : removes all the points from the point list.
To Closest : is available only when the screen is
accessed with the Change Design Point… button. This
will automatically select the point in the point list that is
nearest to the previously staked point, which is the
selected point when the screen if first accessed.
<- Insert / <-Append : will insert the point specified in
the corresponding field above the point selected in the
point list. When is selected, the point is
appended to the end of the list.
Change to : is available only when the screen is accessed
with the Change Design Point… button. This is used to
stake the point currently selected in the point list.