Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 169)

Survey Menu
R-161
Remote Elevation
Survey Remote Elevation .
The Remote Elevation screen will compute the elevation for the
occupy point by shooting a foresight with a known elevation, or it will
compute the elevation for a foresight when the occupy elevation is
known.
Known Elevation Is…: is where you specify if the
Occupy point or the Foresight point has a known
elevation.
Elevation: is the known elevation for the selected point.
Shoot: defines if you want to perform a Direct shot only,
or Direct & Reverse shots to the foresight.
HI: is the distance that the total station is above the
ground.
HR: is the length of the rod.
: opens the Smart Target options (Page R-457).
; Store Pt : When checked, the elevation of the point
specified here will be replaced with the computed
elevation.
Take Shot… : computes the elevation for the point that had an
unknown elevation and optionally writes that elevation to the
specified Store Pt.
Results
OCC Elevation: displays the elevation for the occupy point.
FS Elevation: displays the elevation for the foresight point.