Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 53)

Job Menu
R-45
Surveying Settings
Job Settings Surveying .
The Surveying Settings card allows you to select various options that
affect how data collection is performed.
; Prompt for Description : When checked, a prompt for
a description will appear before any new point is stored
from only the routines under the Survey menu (Page R-
123).
Note: Descriptions can be no longer than 16 characters.
; Prompt for Height of Rod : When checked, a prompt
for the rod height will appear before any new point is
stored.
; Prompt for Layer : When checked, a prompt to select
a layer will appear before any new point is stored from
only the routines under the Survey menu (Page R-123).
; Prompt for Attributes : When checked, a prompt to
select feature information will appear before any new point is stored
from only the routines under the Survey menu (Page R-123). This
also requires that a feature file be selected from the Files Settings
card, described above.
; Prompt for Picture : if checked, a prompt will appear before
storing a point where you have the option of taking one or more
pictures associated with the current point. (Only available when
running on a Nomad with a digital camera.)
; Adjust for Earth Curvature / Refraction : when checked, the
elevations for new points are adjusted to compensate for the
curvature of the earth and refraction.
; Detect Duplicate Shots : When checked, a prompt will appear
before attempting to store a second shot to the same location. This
helps to catch when robotic total stations have lost lock while
surveying. The distance tolerances set in the Repetition Settings