Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 66)

Survey Pro Reference Manual
R-58
General Settings
The General Settings card can contain the following miscellaneous
settings:
; Use Enter Key to Move Between Fields : When
checked, the [Enter] key will move the cursor to the next
field in all screens. When unchecked, the [Enter] key
will perform a different function depending on the field
selected.
Note: The arrow keys can also be used to move the
cursor between fields.
; Allow Alphanumeric Point Names : When checked,
numeric or alpha character can be used for point names.
If unchecked, only numeric point names are valid.
; Always Prompt for Backsight Check : When
checked, you will be prompted if you tap from the
Backsight Solved screen without first performing a backsight check.
You will also be prompted if you cancel out of the Backsight Solved
screen and then tap from the Backsight Setup screen.
Note: You will never be prompted to check your backsight when
running in Manual Mode.
; Use Classic Backsight Setup : When checked, the backsight setup
routine functions as it did in versions of Survey Pro before 4.0.
Basically the Backsight Solved screen will not appear after solving
your backsight. The Check Backsight and Backsight Circle screens
can still be accessed manually from the Backsight Setup screen.
; Beep When Storing Points : When checked, a beep will sound
whenever a new point is stored.
; Beep On Control Activation : When checked, a beep occurs when
any button, checkbox, or other control is tapped.