Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 92)

Survey Pro Reference Manual
R-84
Note: Custom code buttons remain intact even when switching or
creating new jobs because the details of these buttons are stored to a
text file in the Survey Pro program folder called NoteCode.ini. If you
want to copy custom code buttons to another data collector, you must
copy this file to the Survey Pro folder on the other data collector.
View DTM
Job View DTM .
Before viewing a DTM, the Setup DTM 3D screen will open where the
DTM layers must be defined. This screen is also used to define other
parameters for the DTM.
Layers : opens the Layers for Staking DTM screen
where the DTM layers are selected.
Boundary : opens the Choose Polyline screen where a
polyline can be selected that defines the boundary of the
DTM.
Exclude points…: will move any points that exist
outside the selected boundary to the Auxiliary layer. If a
point is later stored outside the boundary, they will also
be moved to the Auxiliary layer.
Discard the boundary…: will initially move any points
that exist outside the boundary to the Auxiliary layer. If
a point is later stored outside the boundary, the selected
boundary is automatically unselected.
Clear : will unselect the selected boundary and move it to the
Auxiliary layer.
Breaklines… : will open the Add/Edit Break lines screen where DTM
break lines can be added or edited.
Points… : will open the Points on DTM Layer screen where the points
on the DTM layer can be viewed, new points can be imported, and
existing points can be deleted (moved to the Auxiliary layer).