Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 46)

Survey Pro Reference Manual
R-38
Instrument Settings – Screen Two
The second Instrument Settings screen opens whenever a new
instrument profile is being created, or when an existing profile is
being edited.
The options available on this screen will vary slightly depending on
the total station model selected.
Name: is the name of the instrument profile being
created or changed. This is the name that appears in the
list on the first Instrument Settings screen.
Brand: is where you specify the manufacturer of the
instrument that you are using from a dropdown list.
Model: is where you specify the model of the instrument
that you are using from a dropdown list.
Serial Port: is the serial port on the data collector used
for communications with the total station. (Bluetooth can
also be selected for wireless communication between the
data collector and a compatible total station.)
Baud Rate: is the speed at which communication occurs
with the total station. This must match the baud rate
configured within the total station.
Parity: is the parity used for communication with the instrument.
This must match the parity setting configured within the total
station.
PIN: (applicable only when using a supported total station) is the
Personal Identification Number that was entered in the total station.
These numbers must match for successful communications.
Bluetooth… : (applicable only when using Bluetooth with a supported
total station) accesses the Bluetooth configuration screen that comes
with the Bluetooth driver software where you can quickly check or
change the virtual COM port and favorites.
Note: See the User’s Manual for more information on configuring
Bluetooth with a supported total station.