Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 26)

Survey Pro Reference Manual
R-18
Import *.CR5 Coordinates
When importing a CR5 file, you will first be prompted to
select the layer where you want the new data stored.
Select a layer and tap to continue.
In the next screen, select the distance units that the
coordinates were stored in and tap .
Import *.GPS Coordinates
When importing a GPS file, you will first be prompted to
select the layer where you want the new data stored.
Select a layer and tap to continue.
In the next screen, select the distance units that the
coordinates were stored in and tap .
When importing coordinates from both a TDS CR5 and GPS file from
the same job, the GPS coordinate will be linked to the coordinates in
the CR5 file. For more information on this, refer to the GPS User’s
Guide.
Import *.TXT Coordinates
Since the coordinates in an ASCII *.TXT file can be
stored in a variety of formats, two screens are used to
define the format of the file that is being imported once a
layer is selected. The source *.TXT file can contain
either plane coordinates or geodetic coordinates.
Delimiters: is the character that separates each column
of text in the ASCII file.
Units: are the units that the distances in the file were
stored in.
Coordinates: is used to specify if the coordinates are
plane coordinates, geodetic coordinates in degrees-
minutes-seconds format, or geodetic coordinates in
decimal format.