Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 323)

Stakeout Menu
R-315
Stake > : accesses the next screen, which is identical to the third
Stake Points screen, described on Page R-282.
Screen Summary
Screen One is used to define the primary curve used to determine the
location of the curve to be staked and the station associated with the
PC Point.
Screen Two is used to define the offset distance and location, the
station to be staked and the station interval.
Screen Three provides the distance and direction information to the
current station to be staked from the occupy point.
Screen Four is used to stake the current station.
Stake Out Point (Store/Tape) Screen
The Stake Out Point (Store/Tape) screen allows you to
store a point at a specified offset from the stake point,
resulting in a point that is either closer to, or further
away from the total station.
Point: is the name assigned to the new offset point.
Description: is the description assigned to the new offset
point.
Tape Out/Tape In: is the specified offset from the stake
point. A positive value will result in a new point that is
further away from the total station. The default value is
the appropriate distance correction to the design point.
: stores the new offset point.