Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 125)

Job Menu – Basic GPS Module
R-117
Change Settings
Job Settings Connections Change Settings .
The Change Settings screen can be used to quickly switch the
base/rover receiver between serial and Bluetooth and access other
Bluetooth tools.
Windows Bluetooth Settings : Opens the Windows
Bluetooth Settings screen where Bluetooth devices can
be configured. You will typically only use this screen
when configuring a Bluetooth cellular phone for Internet
base corrections as described in the Radio Settings
screen on Page 119.
Verify Bluetooth Choices : Opens the Verify Bluetooth
Choices screen, described below.
Verify Bluetooth Choices
Job Settings Connections Change Settings
Verify Bluetooth Choices
.
The Verify Bluetooth Choices screen performs a scan to
quickly verify that the Bluetooth adaptors listed are
connected to the corresponding receivers, or if a serial
cable is connected. Be sure all receivers are powered on
with the appropriate Bluetooth dongle(s) connected to
Port 2 on the receiver(s) and any serial cables are
attached before starting the scan.