Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 328)

Survey Pro Reference Manual
R-320
Show Station
Stakeout Show Station .
The Show Station routine allows you to take a shot to a prism that is
positioned anywhere near a polyline, a range of points that define a
line, or an alignment to see where the prism is located in relation to
the line.
Tap Line… : allows you to tap an existing polyline or
alignment that the station and offset will be computed
from.
To/From… : allows you to enter a range of points that
define the line where the station and offset will be
computed from.
Begin Station: is the station assigned to the beginning
of the line.
Backsight… : accesses the Backsight Setup screen (Page
R-124).
Next > : takes you to the next Show Station screen
where the slope staking parameters are set up.