Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 104)

Survey Pro Reference Manual
R-96
Take Picture
Job Take Picture .
The Take Picture routine is only available on a Nomad with a built-in
camera. The routine is used to take a new picture and optionally
associate it with an existing point.
Align the shot in the first Take Picture screen and when
ready, press the (Enter) button on the data collector to
take the picture. The picture will be displayed on the
second screen automatically. The first two screens of the
routine are part of the Windows Mobile® Pictures &
Video application.
The second screen is used to preview the picture. You
must tap or press the (Enter) button to continue to
the final screen. If the picture is unacceptable, you can
cancel from the third screen and start over.
Note: The options available from the bottom of this
screen are part of the Windows Mobile® Pictures &
Video application and are not supported in Survey Pro.