Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 332)

Survey Pro Reference Manual
R-324
Store Offset Points – Screen Three
The third Store Offset Points screen is used to define which offset
points will be stored.
From Station: is the station where the stored offset
points will begin.
To Station: is the station where the stored offset points
will end.
Station Interval: is the distance between the stations
where offset points are stored.
Note: If the Stake Corners option is selected in the
Stakeout Settings screen, offset points will also be stored
where ever the horizontal or vertical section of the road
changes.
Start Point: is the point number that will be assigned to
the first offset point that is stored. Each stored point
that follows will be assigned the next available point number.
Description: is the description that will be assigned to all the offset
points that are stored.
; Center Line: offset points will be stored at locations on the
centerline when checked.
; Edge of Pavement: offset points will be stored at the end of the
first segment (the edge of the roadbed) on the left and/or right side
when checked.
; Curb : offset point will be stored at the end of the second segment
(the end of the curb or ditch) on the left and/or right side when
checked.
Unselect All : quickly unchecks all the checkboxes.
< Back : returns to the previous screen.
Store : stores all the offset points based on the information provided.