Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 196)

Survey Pro Reference Manual
R-188
Connect to Base Connect to Rover with Bluetooth
Create New Receiver… : opens the Receiver Setup screen (Page R-
101), where you can define a new base or rover receiver.
Receiver Settings: opens the Job | Settings | Receiver and Post
Process screens, where you can change the settings for the current
active receiver, activate a different receiver, or change the post
processing settings.
Bluetooth…: opens the control panel Bluetooth settings application,
where you can set a recognized receiver as the Bluetooth favorite.
This button only shows when the selected receiver is using the
Bluetooth port.
Connect>: sets the selected instrument as the current active
instrument, begins communicating with the device, and opens the
next setup screen in the Start GPS Survey wizard.
Note: When the current active instrument is Demo Mode, only the
Demo Mode
receiver will show up in the list. If you are in Demo Mode
and you wish to begin surveying with a real receiver, tap Receiver
Settings or Create Receiver to activate the desired instrument.