Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 79)

Job Menu
R-71
Edit Alignment Screen – VAL Tab
The VAL (Vertical ALignment) tab in the Edit Alignment screen is
used to enter or modify only the vertical details of an alignment.
Note: The total horizontal length of the VAL must be equal to or
greater than the total horizontal length of the HAL when the
alignment is used for road layout.
Insert… : opens the Edit Segment screen where a new
vertical segment can be inserted prior to the selected
segment.
Edit… : opens the Edit Segment screen where the
selected vertical segment can be modified.
Remove : removes the selected segment and
automatically joins the next segment with the previous
segment.
Note: The station and elevation at the beginning of the
selected vertical segment are displayed at the bottom of
the screen.