Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 93)

Job Menu
R-85
3D View… : will open the 3D View screen where the DTM can be
viewed from any angle.
Layers for Staking DTM
Job View DTM Layers… .
The Layers for Staking DTM screen is used to select the non-
reference DTM layer and an optional layer where invalid objects are
stored.
Select DTM Layer: is the non-reference DTM layer used
for stake points that are stored and other objects that
exist on the surface you are staking. These points will be
used to generate a DTM surface to compare to the
reference DTM surface.
Select Auxiliary Layer: if this is checked and a point is
stored that is located outside the selected DTM
boundary, the point is automatically stored on the
Auxiliary layer. If left unchecked, a prompt will appear
when storing a point outside the boundary where you
must specify the layer to store the new point.
Layer (Auxiliary): is the layer that all points will be
stored to if they cannot be stored to the DTM layer.