Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 39)

File Menu
R-31
Transfer
File Transfer .
The Transfer screen allows you to transfer files between the data
collector and another device running TDS software.
Connecting to: specifies which device you are
communicating with from the following options:
• HP48: if you are connecting to a Hewlett Packard
HP48 calculator.
• Husky: if you are connecting to a Husky FS-series
data collector.
• Ranger / TSCe / ACU / Pocket PC: if you are
connecting to any of the devices listed.
• Windows
PC
: if you are connecting to a personal
computer that is running Windows CE Services.
• Geodimeter
600
: if you are connecting to a
Geodimeter 600-series total station running TDS
onboard software.
COM Port: specifies which COM port you are using on the local
machine.
Baud Rate: specifies the communications speed. The baud rate must
match in both units for successful communications.
Parity: specifies the parity. The parity must match in both units.
When in doubt, select None here. All transfers are controlled from
the PC when in this special mode.
Enter Server Mode : places the data collector in server mode where all
file transfers are controlled from a PC running either TDS Survey
Link or TDS ForeSight. Tapping Cancel will disconnect server mode.
Send File… : will open the Open dialog box where the file that you
want to send can be selected. Once selected, the file is sent from the
data collector to the specified device. A progress bar will be displayed